Art toys · 2026
3D printed art toys: your character as a collectible figure
Can you make an art toy with 3D printing?
Yes. An art toy (or designer toy) is an artist's collectible figure with rounded shapes and a smooth surface, made in vinyl when it's mass-produced. With 3D printing it's printed in resin from a file: your own, one an artist sells with a print licence, or one modelled to order from your drawings. As a guide, a 75 mm figure costs €12–€40 and a 20 cm one €17–€55, unpainted. On Fabrishare, a network of makers, you post the project for free and get offers within 24 hours.
Who is a 3D printed art toy for?
Artists and illustrators
Your character, from your drawings or your brand, as a figure you can hold: for your desk, your social media or a convention table.
Numbered editions to sell
Small runs of 10, 25 or 50 copies for your online shop, a fair or your backers, with no mould and no minimum quantity.
Small batch 3D printingGifts
A one-off figure of someone's favourite character, or a person or pet as a big-head figure, modelled from photos.
Custom figurine from photosCollectors
You buy the file from a sculptor who sells their art toys for printing and have it printed, raw to paint yourself or ready painted.
Before producing in vinyl or cast resin
A printed copy works as a prototype to check proportions and colours, or as a master for a silicone mould to cast copies in resin.
Masters for silicone moulds
Where does your art toy's file come from?
Printing needs a 3D model (STL or OBJ). There are three routes, and all three end the same way: a maker prints it.
Your own 3D design
If you model, send the file as it is. The maker checks for walls that are too thin, keeps supports off the face and sees whether the figure should be split into parts (head, body, base).
An artist's file, with a print licence
Many sculptors sell their art toys as files for printing. Check the licence before posting the project: a personal licence covers your own copy, and some artists accept a maker printing it for you while others require a commercial licence. To sell copies you need a licence that expressly allows it.
Modelled to order from your drawings
If you only have artwork, a maker who models sculpts the character in 3D. Send front, side and back views, the height and the colours. Modelling is quoted separately, and it's worth agreeing that the file is yours: then each new copy only costs the printing.
Resin or FDM for an art toy?
For almost every art toy, resin: it gives the detail and the smooth surface people expect from a collectible figure. FDM makes sense for large figures with simple shapes.
| Resin | FDM (filament) | |
|---|---|---|
| Detail | Very fine: eyes, textures, small lettering | Medium: small details get lost |
| Surface | Smooth, with almost no visible layers | Visible layers: needs sanding and a filler primer |
| Size | In one piece up to about 25 cm; larger, in parts | Large figures, from 30 cm up |
| Price | The usual for a figure | Cheaper at large sizes |
| Best for | Collector editions and figures to paint | Display figures with rounded shapes and no fine detail |
Cured resin is more brittle than vinyl: a printed art toy is fine on a shelf, but it isn't a toy to throw on the floor.
Finishes: raw, primed or painted
The vinyl look, with flat colours and a matt or satin surface, doesn't come out of the printer: it comes from the finish.
Raw
Supports removed, washed and cured, in the colour of the resin (grey, white or beige). For anyone who will sand and prime it themselves.
Primed
Sanded and primed, ready to paint. The most practical option if you're an artist painting your own edition.
Hand-painted
Flat colours, gradients or your exact palette, with a matt or satin varnish for the vinyl effect. Quoted separately.
Miniature and figure painting serviceIn parts, with magnets or pins
Head, body and accessories separate: easier to paint, safer in the post, and they allow swappable heads or accessories.
In coloured resin
Some makers have coloured or clear resins: a single-colour figure with no paint, or translucent parts for effects.
How much does it cost to 3D print an art toy?
Estimates from the Fabrishare calculator in resin, unpainted. Height moves the price most: in resin, print time depends on the height of the part. Each maker sets their own price in their offer.
| Piece | Range | Typical |
|---|---|---|
| 28–32 mm mini (pendant or keyring) | €3–€10 | €6 |
| 75 mm figure | €12–€40 | €25 |
| 20 cm figure | €17–€55 | €34 |
| Edition of 25 × 75 mm figures | €57–€189 | €118 (about €4.72 each) |
| Modelling from your drawings | Depends on detail and style | Ask for a quote |
Prices exclude VAT and shipping. The 75 mm figure is calculated with the volume of a bust of that height; a chunkier figure costs a little more.
Modelling the file and hand-painting are quoted separately. If you don't have a file, modelling is the biggest part of the cost.
Limited editions and numbered series
3D printing needs no mould, so an edition of 10 or 25 copies makes sense and you can print in batches as you sell, without a cupboard full of stock.
To number the edition: the number engraved under the base (one version of the file per number), painted by hand, or on a signed card that goes with each figure.
If the edition is large, it can be shared across several makers. Ask for a sample copy first and fix the resin and colour so they all come out the same.
If you're selling, present the figures as collectibles for adults. In the EU, a product designed for children under 14 to play with is a toy and needs CE marking; other markets have similar rules.
Art toy, anime figure or custom figurine?
An art toy is an artist's design, simplified and soft-edged, made to be collected. An anime figure is usually a scale figure with many parts and very fine detail, and a custom figurine reproduces a person or a pet from photos. Each has its own guide.
What isn't printed: copies of branded figures
A style belongs to nobody: a big head, rounded shapes, a vinyl look or chibi proportions can all be ordered with your own character.
What isn't printed is copies or scans of branded figures (those from Pop Mart, Funko or Labubu, for example) or protected characters without a licence, even if they're just for you or the file is shared free online.
If you're selling your edition, the design has to be yours or the file's licence has to allow selling copies. When you post the project you confirm you have the right to order it, and the maker can turn down anything that doesn't.
How to order your art toy
- 1Post your project for free with the file (or your drawings), the height, how many copies you want and the finish.
- 2Makers in the network send you offers with price, material and lead time; the first usually arrives within about 1.6 hours.
- 3Compare, choose, and the maker prints your art toy and ships it to you.
Questions about 3D printed art toys
What is an art toy?
An artist's collectible figure, also called a designer toy: simplified designs with rounded shapes and flat colours, mass-produced in vinyl and sold in limited editions. With 3D printing they're made in resin with no mould, from a single copy.
How much does it cost to 3D print an art toy?
In resin and unpainted, a 75 mm figure costs €12–€40 and a 20 cm one €17–€55, excluding VAT and shipping. An edition of 25 × 75 mm figures comes to about €4.72 each. Painting and modelling are extra.
Is resin or FDM better for an art toy?
Resin in almost every case: it gives fine detail and a smooth surface, which is what people expect from a collectible figure. FDM only pays off for large figures with simple shapes, and they need sanding and priming so the layers don't show.
Can I sell the figures I have printed?
Yes, if the design is yours or the file's licence allows selling copies. Present them as collectibles: in the EU, a product designed for children under 14 to play with is a toy and needs CE marking.
Can I have a copy of a shop-bought figure printed?
No. Copies or scans of branded figures and protected characters without a licence aren't printed. What you can order is your own character in that style: a big head, rounded shapes and a vinyl-look finish.
I only have drawings of my character. Can it be printed?
Yes: a maker who models sculpts it in 3D from your drawings. Send front, side and back views, the height and the colours. Modelling is quoted separately, and it's worth agreeing that the file is yours.
Can it be delivered painted?
Yes, if the maker paints: ask for it in the project and it's quoted separately. You can also ask for it primed, ready for you to paint.
How long does it take?
Offers arrive within 24 hours: the first after a median of 1.6 hours. Printing a 20 cm figure in resin takes about 4 hours of machine time, plus washing, curing and finishing; each maker gives the lead time in their offer.