Fabrishare
Fabrishare

Resin · 2026

Resin 3D printing service: fine detail and smooth surfaces

What is a resin 3D printing service, and when is it worth it?

It means having a part printed in liquid resin that hardens under ultraviolet light, layer by layer. It's the right choice when detail and surface finish matter: miniatures, figures, busts, jewellery, masters for moulds and small, precise parts. As a guide, a 28 mm miniature costs about €6, a 75 mm bust about €25 and a 20 cm figure about €34, unpainted, excluding VAT and shipping. On Fabrishare, a network of makers, you post your file for free and get offers within 24 hours. Fabrishare doesn't print: the maker you choose does.

What gets printed in resin

Anything that's looked at up close, painted or has to fit precisely. Each use has its own guide:

  • Gaming miniatures

    From 28 to 75 mm, for wargames and RPGs, with faces and detail that get lost in filament.

    Resin miniature printing
  • Figures and busts

    Collectable figures, busts and characters, in one piece or in parts if they're large.

    3D figure printing
  • Jewellery and casting

    Rings and pendants in castable resin for casting in silver or gold, and fit tests in standard resin.

    3D printed jewellery
  • Masters for moulds

    The original part that's copied in silicone to cast copies in resin, plaster or soap.

    Masters for silicone moulds
  • Small parts and detailed prototypes

    Clips, small gears, product mock-ups and prototypes to look at and show, where FDM falls short.

    Rapid prototyping
  • Dioramas and scale models

    Figures, vehicles and scale details that are looked at from a few centimetres away.

    Scale dioramas

Resin 3D printing technologies: MSLA, DLP and SLA

All three harden liquid resin with ultraviolet light; what changes is how the light reaches each layer. If you're ordering, the results look very similar: the resin, the settings and the maker matter more.

MSLA (LCD)DLPSLA (laser)
How each layer curesAn LCD screen acts as a mask and cures the whole layer at onceA projector cures the whole layer at onceA laser traces the layer point by point
What sets the print timeThe height of the partThe height of the partThe height and the area of each layer
Where you see it mostDesktop printers: the most common among makersJewellery, dental and small partsProfessional machines
When to ask for itMiniatures, figures, busts and almost everything elseVery precise small partsPrototypes with a very smooth surface and technical parts

You don't need to pick a technology: say what the part is for and each maker states in their offer what they'll print it with.

Types of resin and which to ask for

The resin matters as much as the printer. These are the ones asked for most; not every maker has all of them, so say so in your project:

  • Standard

    The finest detail and the lowest price, but brittle: it breaks if dropped. For display pieces, figures and masters.

  • Tough or ABS-like

    Slightly flexible, so it survives knocks and thin parts like spears or clips. For gaming miniatures and parts that get handled.

  • Flexible

    Bends and springs back, like rubber. For seals, bumpers, grips and soft prototypes, with less fine detail.

  • High-temperature

    Copes with about 120 °C to over 200 °C depending on the resin, but it's rigid and brittle. For moulds, jigs and parts next to a heat source.

    Heat-resistant 3D printing
  • Clear

    To show the inside, for light diffusers or display pieces. It comes out translucent: to make it fully clear it has to be sanded and varnished, and it can yellow in sunlight.

  • Castable

    Burns out in the kiln without leaving residue: it's the resin for lost-wax jewellery. More expensive and more delicate to print.

Finish: supports on, supports off, primed or painted

What arrives depends on what you ask for. The usual levels, from cheapest to most expensive:

  • Supports on: the part washed and cured, with the supports still attached. Some makers suggest this for very thin parts so they don't break in the post; you remove them yourself.
  • Supports off: supports removed and marks cleaned up. This is what's usually meant by ready to paint.
  • Primed: with a coat of primer, which shows up any flaw and saves you a step if you're going to paint it.
  • Painted: by hand, by a maker who paints, from tabletop to display standard. Quoted separately.
Miniature and figure painting service

How much resin 3D printing costs

Ballpark prices from the Fabrishare calculator for the whole job, unpainted, excluding VAT and shipping. Each maker sets their own price in their offer:

PartTechnologyRangeTypical
28 mm miniatureResin€3 – €10€6
Batch of 10 × 28 mm miniaturesResin€10 – €34€21
75 mm bustResin€12 – €40€25
20 cm figureResin€17 – €55€34

Several parts on the same build plate share the fixed work of each job (preparing, washing, curing and removing supports): 10 miniatures come to about €2.14 each, against €6 for a single one. Special resins (tough, clear, high-temperature or castable) cost more than standard and push the price up.

Work out the price of your file
3D printing cost calculator
How much does 3D printing cost?

How long it takes, with real data

In resin, machine time is set by the height of the part, not by how many fit on the plate: each millimetre of height adds around 1.2 minutes. According to the calculator, a 28 mm miniature takes about 40 minutes; ten on the same plate, about 40 minutes; a 75 mm bust, about 1.5 hours; and a 20 cm figure, about 4 hours. Washing, curing and support removal come on top.

On the first projects posted on Fabrishare, the first offer arrived after a median of 1.6 hours, and makers proposed a median of 7 days until shipping. Each offer shows its own lead time: if you're in a hurry, say so in the project and pick the one that fits.

How long does 3D printing take?
3D printing quotes compared (real data)

What to put in your project for an accurate offer

  1. 1

    The file

    STL, OBJ or 3MF, or a ZIP with all the parts. With an STL you see the part in 3D and get a ballpark price straight away.

  2. 2

    The size

    The final height in mm. From the same file, a 32 mm miniature and a 20 cm figure are very different jobs. Large parts are printed hollow, with drain holes, or in sections.

  3. 3

    The layer height

    0.05 mm is standard and works for almost everything. For jewellery and very small parts it goes down to 0.025–0.03 mm, which takes longer.

  4. 4

    The resin

    Standard, tough, flexible, high-temperature, clear or castable. If you're not sure, say what the part is for and the maker will suggest one.

  5. 5

    Finish and quantity

    Supports on or off, primed or painted, and how many copies of each part you need.

How to order your resin print

  1. 1Post your project for free with the file, the size, the resin and the finish you want.
  2. 2Makers in the network with resin printers send you offers with price, lead time and shipping; the first usually arrives within about 1.6 hours.
  3. 3Compare, choose one, and the maker prints the part and ships it to you.
Resin vs FDM: which for each part

Questions about resin 3D printing

How much does resin 3D printing cost?

It depends mainly on the size and how many parts go together. As a guide, a 28 mm miniature costs €3 to €10, 10 miniatures about €21, a 75 mm bust about €25 and a 20 cm figure about €34, unpainted, excluding VAT and shipping. Each maker sets their own price.

What's the difference between MSLA, DLP and SLA?

How the light reaches the resin. In MSLA an LCD screen, and in DLP a projector, cure the whole layer at once; in SLA a laser traces it point by point. All three give very fine detail; MSLA is the most common among makers.

Is resin brittle?

Standard resin is: it breaks if the part is dropped. For parts that get handled, ask for tough or ABS-like resin. For parts under load or in the sun, FDM is usually the better choice.

Which layer height should I ask for?

0.05 mm works for almost everything, miniatures included. For jewellery or very small parts, 0.025 to 0.03 mm. Finer layers take longer and make little visible difference on large parts.

Can something large be printed in resin?

Yes, in sections or hollow. Resin printers have a small to medium build plate, so large parts are split, printed in pieces and glued. Printing it hollow saves resin and lowers the price.

Can I get it painted?

Yes, if you ask: some makers paint, from tabletop to display standard, and quote it separately. You can also ask for it primed, or just with the supports removed so you can paint it yourself.

How quickly do offers arrive?

Within 24 hours: on the first projects, the first offer arrived after a median of 1.6 hours. Each maker states their lead time in the offer.

Does Fabrishare print the parts?

No. Fabrishare connects your project with independent makers who print in resin. You post once, compare offers, and the maker you choose prints the part and ships it to you.