Fabrishare
Fabrishare

Miniatures and wargaming · 2026

Restoring a classic miniatures army with 3D printing

Can you restore an old miniatures army with 3D printing?

Yes, with one clear limit: what gets printed is what the army is missing, not copies of its miniatures. Generic weapons, shields and banners to replace broken ones, bases and movement trays for rebasing, conversion bits, terrain, and miniatures from independent designers with a print licence to complete units. A single part costs about the same as a 28 mm miniature, €3–€10; 10 miniatures to complete a unit come to about €21 (€2.14 each), excluding VAT and shipping, per the Fabrishare calculator. On Fabrishare, a network of makers, you post the project for free and get quotes within 24 hours.

What can be 3D printed to restore vintage miniatures

A second-hand army, or one rescued from the loft, usually turns up with bent spears, lost shields, bases in a format nobody uses any more and half-finished units. This is what a maker can print:

  • Generic weapons, shields and banners

    To replace broken or missing ones: spears, swords, axes, plain shields or shields with your own emblem, and banner poles. Generic parts, fitted to the hands and scale of your figures.

  • Bases and rebasing

    New bases in the size and shape your current rules ask for, slotted for figures with a tab or plain, plus adapters so the old base sits in the new one without prising the miniature off.

  • Movement trays

    To move a whole regiment at once, sized exactly to your bases and the way you rank them up. In FDM they're cheap and hard-wearing.

  • Conversion bits

    Different heads, backpacks or weapons so repeated figures don't look like clones, or so an old unit can take on another role in your list.

    Conversion bits for miniatures
  • Miniatures to complete units

    If a regiment is short of figures, it's completed with designs from independent sculptors in a similar style and scale, with a licence that allows printing. They're not copies of the missing ones: they're other figures that fit the unit.

    Proxy miniatures
  • Terrain for the table

    Generic ruins, walls, fences and buildings, so the army gets played with again instead of just sitting in the cabinet.

    Wargame terrain
  • Matching paint

    A maker or a painter in the network can paint the new parts so they blend in with the old scheme: send well-lit photos of the army.

    Miniature painting service

Restore and convert, don't reproduce

A miniature being out of production for decades doesn't make it free to copy: the sculpt stays protected for many years. With a functional spare part you can reproduce the original; with a miniature you can't, because the figure itself is the work. That's why Fabrishare doesn't print copies, scans or recasts of a manufacturer's miniatures, whole or in part: not even the arm or head missing from that particular figure.

Everything that isn't someone else's sculpt can be printed: bases, trays, generic parts, independent designs with a print licence and anything you design yourself. Fabrishare doesn't check licences: when you post the project you confirm you have the right to order the print, and a maker can turn the job down if that isn't the case.

What can you order for an old army, and what can't you?

The short rule: if the part is a manufacturer's sculpt, no; if it's generic, from an independent designer with a licence, or yours, yes.

Yes

  • Bases, movement trays and base adapters.
  • Generic weapons, shields and banners, or ones you've designed.
  • Bits and miniatures from independent designers whose licence allows printing for someone else.
  • Generic terrain.
  • Emblems and symbols for your own army.

No

  • Copies of a manufacturer's miniatures, even if they're out of production.
  • Scans or recasts of a figure you already own, to get more of it.
  • The original part missing from a particular figure: its arm, its head, its banner.
  • A game's registered logos and emblems.
  • Files whose licence doesn't let someone else print them.

How much does it cost to restore an army with 3D printing?

Fabrishare calculator estimate in resin, unpainted, excluding VAT and shipping. Each maker sets their own price in their quote.

OrderRangeTypical
1 single part (weapon, shield, banner) or 1 × 28 mm miniature€3–€10€6
10 × 28 mm miniatures (one unit)€10–€34€21 (€2.14 each)
Bases, movement trays and terrainDepends on size and quantityAsk for a quote

A single part costs almost as much as a whole miniature because what costs is setting up the print, removing supports, washing and curing, not the resin. So it pays to put everything the army is missing into one project: in a batch of 10, each miniature comes to about €2.14.

Trays and plain bases print well in FDM, which is cheaper; textured bases and detailed parts are printed in resin.

How to order parts that fit vintage miniatures

Figures from thirty years ago don't follow today's proportions. With these details, the maker gets it right first time:

  1. 1

    Measure the real scale

    Many older miniatures were sold as 25 mm and are shorter and slimmer than today's 28–32 mm. Measure a figure from feet to eyes and write it down in mm: the maker rescales the new parts so they don't look out of place.

  2. 2

    Measure the bases

    The size and shape of the ones you have and the ones you want. If your figures have a tab under their feet, ask for slotted bases; if they're glued to an old base, ask for an adapter or a recessed base.

  3. 3

    Photos with a ruler alongside

    Of the figure and the spot where the new part goes: the hand that held the spear, the shield arm. Use calipers to measure the gap in the hand or the thickness of the arm.

  4. 4

    The file or the idea

    An STL from an independent designer whose licence allows printing it for you or, if you don't have one, photos and measurements so a maker who designs can model a generic part. Design is quoted separately.

  5. 5

    Everything in one project

    Weapons, bases, trays and miniatures in the same order: one maker, one delivery and each part comes out cheaper. Ask for two or three spares of the fine parts, like spears and poles.

Before printing: stripping, gluing and priming

This isn't a restoration tutorial: just enough to know which part you do yourself and how the new parts join the old ones.

Stripping old paint

Metal figures cope well with a paint stripper made for miniatures. With old plastic, test it first on a figure you don't mind losing: some soften or turn brittle.

Gluing and reinforcing

For metal and resin, superglue or epoxy; plastic cement only bonds polystyrene kit plastic and won't glue resin. On joints that take weight, such as an arm holding a spear, ask the maker for a hole for a 0.8–1 mm brass pin.

Prime everything together

Once the new parts are fitted, one coat of primer evens out metal, plastic and resin, and the paint grips the same everywhere. If you prefer, the maker can send the parts already primed.

For the rest of the army

If as well as restoring it you want to expand the army, take the figures to a roleplaying table, or you need a part that has no file, these guides cover each case:

Conversion bits: prices for batches of bases and parts
Proxy miniatures
Wargame terrain
28 mm RPG miniatures
Miniature painting service
No 3D file? What to do
Discontinued appliance parts: where the original can be reproduced

How to order your army's parts on Fabrishare

  1. 1Post the project for free: photos of the army, the measured scale, the bases you have and the ones you want, and which parts are missing.
  2. 2Makers in the network send you quotes with price and lead time within 24 hours; the first usually arrives in about 1.6 hours.
  3. 3Pick one; the maker prints the parts, cleans them up and sends them to you.
Do you print miniatures or bases? Join the network as a maker

Frequently asked questions about restoring vintage miniatures

Can out-of-production miniatures that the manufacturer no longer sells be printed?

No. Being out of the catalogue for years doesn't free the sculpt, so Fabrishare doesn't print copies, scans or recasts, whole or in part. What you can do is complete the unit with similar independent designs that have a print licence, and replace generic parts.

How much does it cost to replace a broken part?

A single resin part, such as a spear or a shield, costs about the same as a 28 mm miniature: €3–€10, excluding VAT and shipping, per the Fabrishare calculator. If you put several in the same project, each one comes out much cheaper.

How do I make new parts fit in with figures from the 80s and 90s?

Measure a figure from feet to eyes and give the maker the height in mm, with photos and a ruler alongside. Many older figures are shorter and slimmer than today's; the maker rescales weapons, shields or miniatures to match.

Can I rebase my old army to a different base format?

Yes. New bases are printed in the size and shape your rules ask for, slotted or plain, along with adapters to mount the old base on top without removing the figure. Custom movement trays for each unit too.

Resin or FDM?

Resin for weapons, shields, bits and miniatures, which need fine detail. FDM for movement trays, large plain bases and terrain, where it's cheaper and hard-wearing.

What if the missing part has no 3D file?

A maker who designs can model a generic part from photos and measurements: a new spear, shield or banner, not a copy of the original part. Design is quoted separately.

Can the parts be sent painted to match the army?

Yes. A maker or a painter in the network can paint them to follow the old scheme if you send well-lit photos. Painting is priced separately in the quote.

How long does it take?

Quotes arrive within 24 hours: the first after a median of 1.6 hours. Each maker states the printing and delivery time in their quote.