Board games · 2026
Your own board game: a 3D printed prototype and pieces
Can you make your own board game with 3D printing?
Yes, the three-dimensional parts: miniatures, meeples, tokens, dice, raised tiles and the box insert. Cards, the board and the box go to a printer. As a guide, a game's 6 characters as 28 mm resin miniatures cost about €15, and 50 copies of each come to about €1.83 per miniature. On Fabrishare, a network of makers, you post the project for free and get offers within 24 hours.
Which parts of a game are 3D printed
3D printing is for anything with volume. Flat components are printed on paper or board, by a printer or a game manufacturer.
| Component | 3D printed? | How it's usually ordered |
|---|---|---|
| Character miniatures and figures | Yes | Resin, to show the detail; unpainted, primed or painted |
| Meeples, pawns and markers | Yes | FDM in one colour per player, or resin if they're detailed |
| Shaped tokens and resources (coins, gems, cubes) | Yes | FDM in batches; resin for special pieces |
| Custom dice | Yes | Resin, with raised or engraved symbols |
| Raised and modular tiles | Yes | FDM, with interlocking edges |
| Box insert or organiser | Yes | FDM, made to fit the box and the components |
| Cards, folding board, box and rulebook | No | A printer or a board game manufacturer |
From prototype to production
Each stage needs something different: early on, speed and price; at the end, every copy coming out the same.
A prototype to play-test
One or two copies to play and change the rules. Simple FDM pieces, cheap and fast: what matters is reprinting them whenever you change something.
A prototype to show
Resin miniatures, sometimes painted, for photos, videos, conventions or pitching the game to a publisher.
Miniature painting serviceCopies for play-testers and reviewers
5 to 20 complete games for test groups and reviewers, before the campaign.
Small batch 3D printingA crowdfunding campaign
The reward miniatures, from dozens to thousands of copies, shared across several makers.
Crowdfunding miniature productionSelf-publishing
If you sell the game yourself, your own run of the 3D printed pieces, restocked as it sells, without a warehouse full of stock.
High-volume 3D printingThe box insert
A custom organiser gets the game set up in minutes, and reviewers notice.
Board game inserts
What your game's miniatures cost
Estimates from the Fabrishare calculator for unpainted 28 mm resin miniatures. Each maker sets their own price in their offer.
| Order | Range | Typical |
|---|---|---|
| 1 × 28 mm miniature | €3–€10 | €6 |
| The game's 6 characters, 1 copy | €7–€23 | €15 |
| 50 copies of the 6 (300 miniatures) | €263–€878 | €549 (about €1.83 each) |
| FDM meeples, tokens and tiles | Depends on the file and quantity | Ask for a quote |
Prices exclude VAT and shipping. What moves the price most: size, the quantity of each piece, painting, and whether the file needs modelling.
How to get the pieces ready
If you don't have the 3D files
A maker who models can create them from sketches, artwork or measurements. Design is quoted separately and the files are yours: after that, each copy only costs the printing.
Small pieces, thick walls
A meeple or a token gets picked up and dropped a thousand times. Avoid very thin parts and fragile overhangs, especially in FDM, and ask the maker to check the file before the run.
Coloured material or paint
For a game prototype, one plastic colour per player is enough. Painting every piece pushes the price up a lot: keep it for the miniatures in the photos.
Dice: test before ordering many
A printed die may not roll evenly on every face if the design isn't well balanced. Order a few, roll them and adjust before the run.
3D printing or a board game manufacturer?
They aren't mutually exclusive: many games combine both.
3D printing
- No minimum quantity: from a single copy.
- Change the design between versions with no tooling cost.
- Highly detailed resin miniatures.
- Ideal for prototypes, play-testers and runs of dozens or hundreds.
Board game manufacturer
- Makes the cards, board, box and rulebook.
- Usually asks for minimums of several hundred copies for full production.
- Plastic miniatures need an injection mould: expensive up front.
- Cheaper per copy on very large runs.
Your game stays yours
The files and the design are yours. The maker only gets the file once you accept their offer and they print for you.
What isn't printed is a copy of another game's components designed by its publisher. Generic shapes such as a meeple, a cube or a standard die don't have that problem.
How to order your game's pieces
- 1Post your project for free with the files (or sketches and measurements), how many copies of each piece you need and whether they should be painted.
- 2Makers in the network send you offers with price, material and lead time; the first usually arrives within about 1.6 hours.
- 3Compare, choose, and the maker prints the pieces and ships them to you.
Questions about board game prototypes
How much does a board game prototype cost?
It depends on the pieces. 6 characters as 28 mm resin miniatures cost about €15 and a single miniature about €6, excluding VAT and shipping. FDM meeples, tokens and tiles are quoted from the file. Cards, board and box are separate, from a printer.
Which parts of a board game can't be 3D printed?
The flat ones: cards, folding board, box and rulebook. A printer or a board game manufacturer makes those. 3D printing covers miniatures, meeples, tokens, dice, raised tiles and inserts.
How many copies make sense with 3D printing?
From one copy to dozens or hundreds, with no mould. For example, 50 copies of 6 miniatures (300 pieces) come to about €1.83 each. For thousands of identical plastic pieces, an injection mould ends up cheaper per unit.
What if I don't have 3D files for the pieces?
A maker who models creates them from your sketches, artwork or measurements. Design is quoted separately and the files are yours.
Can I print pieces copied from another game?
No: miniatures and components designed by a publisher are protected. Generic pieces (meeples, cubes, standard dice) and everything you designed yourself are fine.
Can dice be 3D printed?
Yes, in resin and with your own symbols. For the final game, test a few first: a printed die may not roll evenly if the design isn't balanced.
How long does it take?
Offers arrive within 24 hours: the first after a median of 1.6 hours. Each maker gives the print lead time in their offer; if it's for a convention or campaign photos, order with time to spare.